I tried to make "GMT style" for the first time in a long time(Inspired by Mr. Daichi)
Both are cases of namoki、Other parts will be transplanted or reprocessed from the previous one, so I will omit the details ww
チュ〇ーダー(チュード〇ル？)It's the wind。
Initially under the crown of Crown? I scraped it and put an appropriate O-ring in the gap to make it look like a "big crown".、It was rejected because the movement of the crown became strange.。
GMT mass 〇ter style。(It is a specification that the lug width and the breath width do not match w)
Initially, the case, bezel, etc. were combined differently.、Above all, the method of fixing the GMT hand was different.。The root of the short hand(Is it a ring?)I used to wear the GMT stick part with "instant adhesive"、It's a blunder that you can get it in about a week and you don't notice it for about half a day。
There is a shocking sight that the second hand keeps pushing the GMT hand, which was stuck between the long and short hands, with 6 beats ...(↓ is before it can be taken)
this time(I forgot to take a photo w)Has scraped off the hakama of the GMT needle and widened the shaft hole with a stick file and inserted it into the hakama of the short hand.。It seems that it will not come off if it is a little shock、Since the clearance with the dial is also taken, the index where the letters are planted can be avoided with a margin.。
While I am ...I'm doing Mendokusai ww
YOSHIPI-'s、Good evening。
It's a watch with my favorite taste! It is cool!
It's a watch with my favorite taste! It is cool!。
It's a watch with my favorite taste! It is cool!!!
It's a watch with my favorite taste! It is cool!。
ichi's Hello。
I didn't like the adhesive, so I applied only the tip of the toothpick.。So maybe it was weak。
GMT hand is Yahoo auction。Since the shaft hole has the same diameter as the short hand, it will not work well if it is left as it is.
That's right。Thank you!
Mendokusai processing is troublesome、I feel like I'm going to do it。
I feel like my original feeling。
YOSHIPI-'s
It's a cool GMT custom 😍
I also went on a needle hunting trip for a long time 🤣
It's difficult when it comes to things that fit the book.、I will buy something that seems to fit to some extent and fix it, so it will cost me a lot of money 😂
After all GMT is cool ~ 👍
Mr. Daichi, good morning!
As you said(Other parts)I can't find it in the middle.
Actually, I crushed about 2 of these GMT hands during processing.(The ring has broken)
I really wanted to remove the ring and the triangular frame color.、I gave up because I couldn't predict the color of the bullion.。
As an aside, the resin is put on the insert of the master style.、Colored resin(Tea department?)Doesn't it look like you're tanned if you put it on?(Human pillar guidance ww)
YOSHIPI-'s
Good morning。
I couldn't think of coloring the resin and serving it 🤣
It might be good 😆
I'll try it if I have a spare bezel 👍
YOSHIPI-'s
Distress and refraction shift、
Smile as usual、While 😂、Let me read Masita! ️
yoohiyy's Hello。
Even if I say Nandakanda, I'm longing for Rolex ○ Su and its crew.