Dial Hand Bezel etc. custom

“waiter” Save the Ocean dial MOD “Ocean Knight”

I've always been interested in this samurai dial, so I made this for this new work.。I think about the name because it's a big deal、Considering the original style of each part、 Bezel Insert Planet Ocean Dial SAMURAI Save the Ocean Needle MM1000 Case MM300 Samurai? Ocean? Master? In association with various things, the case is not as rugged as a samurai.、Shall we give it a more Western-style name? When。I will convert the samurai into a knight without permission and leave it as Ocean Knight because it is a knight of the sea。 Bezel Insert Planet Ocean Dial SAMURAI Save the Ocean Needle MM1000 Case MM300 Samurai? Ocean? Master? In association with various things, the case is not as rugged as a samurai.。I was planning to go with the MM300 bezel, but this one fits better.。 I tried using a thin case back (also namoki) this time。The thickness is within the golden rule of 12.2mm to 12.8mm.。 3 o'clock position crown、There is no crown guard, but it is expected that the thin BIG CROWN will hit gently.。 The bezel insert of this part is Watch&Style、Sapphire crystal is seiko mods、Chapter ring is genuine navy boy。Other than that, it was procured from namoki.。The night light is also quite good。

Belt custom

skx007 7S26-0020 SCUBA DIVER ’S Mod。

It became a little flashy, but I hope it will be helpful to everyone.。 belt、3needle、Chapter ring、It became a little flashy, but I hope it will be helpful to everyone.、 Bezel insert、It became a little flashy, but I hope it will be helpful to everyone.。 It became a little flashy, but I hope it will be helpful to everyone.、I changed the O-ring and polished the mirror surface to a day difference of more than 10 seconds. It's been 26 years, but I'm fine.。 It became a little flashy, but I hope it will be helpful to everyone.。

Dial Hand Bezel etc. custom

skx007 7S26-0020 SCUBA DIVER ’S Mod

"It's good to feel free to play with…I asked you to attach a photo of the report that the contents were replaced by yourself.、I will introduce you。 The following is a reprint of the email (including photos) I received.。 --- It's not so much custom、It is a replacement position for the exterior of glass and belts.。The parts are so small that it's really hard to play with、I just want to open the back cover and play with it。 I liked it when I exchanged it for the SNKC51J1 dial.、Because the case is slightly larger and the dial looks smaller、I thought it would be better if I replaced it with the SNXS case as a trial.、This is fine if it is a silver dial replaced with SNKL.、I think it's normal、As long as I ordered the SNXS with a blue dial。 As long as I ordered the SNXS with a blue dial。30As long as I ordered the SNXS with a blue dial。 As long as I ordered the SNXS with a blue dial、As long as I ordered the SNXS with a blue dial。As long as I ordered the SNXS with a blue dial。 I also had a belt,、Since the bow can does not fit, I processed the bow can attached to the main body and attached it。 I replaced the belt that SNXS also had。Since the SNKL belt can no longer be used, the clasp has been relocated.。 However、SNXS likes the original design、SNXS likes the original design。SNXS likes the original design、SNXS likes the original design、SNXS likes the original design。

Belt custom

Windshield of SNKK87K1、needle

  This is the first post、Thank you! Windshield、Three-pin、I changed the belt。 All parts are purchased from Aliexpress。   The windshield is made of thick mineral glass, which spoils the original smartness.、 I like the retro atmosphere like acrylic glass。   The needle was thin and fluent, so I had a hard time installing it.。 Minute hand as it is、Because the second hand is too long、 You need to cut the tip a little。 I didn't spend much money、 I like it and use it almost every day!

Dial Hand Bezel etc. custom

DIVER’S skx007 “Black-Boy” ～back to the basics～

I've been repeating MC、Deviating from the original genuine texture UP w ... The movement malfunction worsens to the place where I regretted that I did a little too much。 Be prepared to replace the movement for the first time、MC was held during the year-end and New Year holidays。 3Even the needle exchange was requested by the manager of Fujimoto.、Well it was quite difficult(Lol) Replacement items except 3 needles and chapter rings、All procured on AliExpress。 ・ Move = NH36(Day car = Ported from 7s26) ・ Windshield = Sapphire Double Dome Bevel Edge Blue AR ・ Dial = Modified Dot Dial 28.5 mm ・ Bezel = MM300 Style ・ Bezel Insert = Flat Ceramic Genuine Type ・ Crown = S Logo (Stem Cut) ・ 3 Needles = SEIKO snzf17 Genuine ・ Chapter Ring = SKX007 Genuine belt = STRAPCODE Angus Jubilee (replaced with NavyBoy) After all work is completed、If you look at it while grinning, there will be a gap in the chapter ring.(Sweat) I had no choice but to start over。

Belt custom

This is an example of a 3-needle mod (custom) for regular 5 (SNK661K1) cushion case!

Originally from the client, "All recent fives have the same and safe design.、60There is no such thing as a pointed design around the age.…From the exchange、"For example, can I order the case alone as a part?"、To say、It happened that there was a new parts picking dial for SNK661K1 on our parts page.、Order a set of cases and crown、Remove the parts from the purchase of SNK617K1 for the machine inside.、Make the day car a white background for your parts、3The needle was purchased from raffles-time、This time it's done! It looks like a nice vintage! ^^

5 Sports

5This is a mod (custom) example of sports (SRPD71K2)!

It's a custom that looks great on 5 sports with a vintage design! ^^ At first, it seems that he was thinking based on the boy.、Because I can't get it、Please order 5 sports that seem to be customized、After being used for about a month after that、Meanwhile, Alibaba got a double dome sapphire glass and a Batman GMT type slope ceramic insert.、We received your request。 The bezel insert was pasted by yourself。 * All photos are provided by the client.。 ↓ This is the requester's Instagram page https://www.instagram.com/p/CYod3SZv3Qd/