こんにちは 前回は白サブ制作したのですが 今回はベーシックなメインで普段使いできる黒サブを制作しました 今回もパーツはすべてアリエク購入です ワンポイントで秒針を赤に デイト表示は黒にして文字盤を引き締めてみました ベルトはロレの三連です

Long time no see。I finally got a new one with the second DOXA style.。 I saw it in Aliek before、The case I thought it was good but didn't buy it right away and the dial that was out of stock and the discontinued dial have been resold for a while now.、I recently started to see needles of the shape I wanted, so I got them and put them together.。 The old-fashioned case and brown dial are lightly colored with a copic pen and cotton swab to prevent the white calendar from floating too much.、The windshield that originally came with the case had blue AR and the dome was quite tall.、The color and image distortion didn't suit my taste and image, so I replaced it with a flat-shaped glass without AR.。 When I replaced the glass and measured the thickness of the case, it was 12.5mm, which is a case with a NH move, which is less thick.、After replacing the glass, it started working without contact between the needle and the glass, which was a concern.、The clearance looks good, so it's a relief。 This time the part is a case、Dial、Glass、NH35 Move、The needle is Ariek and the belt is ebay。 See you later ^^

In order to try namoki's EXII style bezel, I tried combining it with the NH34 Move that I had previously kept in a junk atlas case by transferring the dial.。 Most of the parts are Namoki and the case is、Bless、Bezel、Crown、Glass、That's the case with chapter rings.。The hand is a minute hand、The hour hand is from Raffles Time, which I used before and kept, and the second hand and GMT hand.、The dial is Ariek、The buckle is a 16mm wide genuine buckle sourced from junk 7n42-8260.、I refinished the hairline and attached it to the namoki bracelet.。 The namoki bracelet is tapered and goes from 20mm to 16mm, so it's hard to find a buckle.、I finally found it。At first, I tried to make the minute hand and hour hand look like a genuine boy with a boyish feel.、When I tried putting it together, it didn't really fit me.、Anyway, let's try moving the needle a little further away from the original style.、If you want to use the EX2 style needles you have, try using a needle with a black base to create a phantom effect.、It may be a little complicated, but I feel like I've put everything together.。I think I'll try this for the time being.。

Genuine parts (dial, 3 hands, chapter ring, bezel) in an aftermarket case、Incorporates a black calendar crown (*Mechanical NH36)、That's a cool example! I think it's great。

It's been a while since I last posted, but I made a Doxa-style clock for the summer that I've wanted to make for a while.。Sorry for not being able to post lately.。 The materials for this time are... Doxa Hommage SEESTERN watch from Ariek, Dial from eBay, Genuine buckle that I previously purchased from Yahoo Shopping.。 The index on the dial is three-dimensional.、I was concerned that the inner circumference of the case and the outside of the index would interfere with each other.、My bad prediction came true、It was not so sweet that it came with a pop.。。。 When、The only way to make it usable is to cut the inner circumference of the case.、remove the glass、After gently removing the gasket、It was my first time seeing the case, so I wasn't sure if the bezel could be removed, and since it was new, I carefully covered it with masking tape and carefully scraped it off with a router and a diamond bit to avoid any unnecessary scratches, especially the inner circumference of the bezel. Repeat measuring the inner circumference until it is widened until it does not interfere with the index.、I polished it by hand with a coarse file and gradually finer it, and then I finished it with a hairline finish using the compound on the Leuter, and I think I managed to get it into shape.。 However, after wearing it for a day, the finish on the engraved part of the back cover was rough and the edges were quite sharp and caught on the skin of my wrist, causing it to become red and itchy. There are still issues to be solved, such as lightly polishing it and making it more comfortable to wear.、I had a hard time deciding whether to add orange to the hands and bezel to make it pop or keep it simple.、In the end, I was quite satisfied with the result 😊

Please forgive me for posting multiple times as I was working on parallel work.。 3rd Diver hommage made from existing things 、I can't stand the difference in color between the index dots and the hour and minute hands.(I knew it)、I ended up buying a new dial.、I changed it (lol) Now in the summer、Arranged by store manager、Changed to urethane belt for 100m overseas etc.。 Dial:AliExpress

Quite、reluctantly、I assembled it today.The 6309 diver was previously installed.、I assembled the black and yellow、This time it's orange。 Dial and needle、ebay the rest、This is Ariek(;_;) also、12The shape of the hour index and the square index are、I'm making the most of it! The minute hand is just a few steps away、I want to push it in(;_;) It was so hard that I put too much pressure on it and almost couldn't make it touch the hour hand.(;_;)、I guess it's okay because it moves(;_;)