I replaced the previously posted "Several Boys" with an external case.。

New parts

Case、Bezel、Chapter ring：namoki

Crown：watch＆style

Here is my memorandum (feature)

On that day, it was a strange case because it was an outside case.。First of all

Shake the windshield without the chapter ring (the photo is an image)

Regain your mind, put in a chapter ring and rub the windshield again.

But something is wrong ...

It's out of focus, but this chapter ring is distorted around 12 o'clock。Because

12There is a dent for alignment around the time。And it's also around 8 o'clock。Did you understand? I completely forgot that there was an alignment protrusion on the back of the chapter ring, and I put in an appropriate "chareen" and rubbed it.。

I thought I didn't see it, but IParentsThe conscience does not allow and the windshield is redone again。But I still didn't realize that this was a hint of the tragedy that would come later ...

Keep your broken heart in your chest, beat the board and put it in the case、If you check that there is no dust or dirt on the board before tightening the back cover, you will feel a sense of discomfort again ...

The index is off the center of the case (the photo is an image)

Certainly, I thought "Did you do it?" Because the dial was fixed with double-sided tape, but the appearance of the calendar is not bad.。Hello! If you look carefully, the mechanism moves left and right inside the case.。

The black spacer (thick) and the regular 5 gray spacer (thin) have different crown tube openings.。Apparently, the protruding part inside the crown tube of the namoki case seems to be the same size (thin) as regular 5.。

9Replace the spacer (black → gray) and redo the board again to inspire the broken heart。

This time there is no rattling。Come on, just as I'm gonna close the back cover ... I won't close it! ??

If you look closely while calming the heart that is connected to one piece of skin on the neck

The 1st and 2nd steps of the female screw on the case side are distorted.。That's right foreshadowing。

Before I got here, I had to redo the windshield many times.、It seems that a small diameter was inadvertently used for the pressing piece of the pusher, and that piece pushed the screw groove pinpoint.。

I was completely broken。

A few days after we started to consider disposal。When I was squeezing other cases with a leutor, "! I should scrape off the distorted screw grooves!"

Remove the windshield in consideration of shavings (at this point, finally decide on a new windshield packing) Shave with a leutor and put the lid together、After scraping, the lid was repeatedly fitted and the deadline was completed (although it was literally screwed in at the end).

I asked for the wrong color of the back cover ww

Oops, the bezel wasn't there yet。With a pusher

"Pakin" → Suru r- "I forgot to insert the spring!"

"Pakin" → Durara r- "I forgot to put the o-ring!"

"Pakin" → Gununu n "Ah! The o-ring is sticking out !!" x 3

It was a lot of trouble, but if it's over, everything is fine ... No、It feels strange ...