Belt custom

RE:1st Diver 〈SBDCX0519〉

The shape of the case of SBDC051 is cool! I've been feeling lately、I was able to get a used SBDC051 in good condition, so I re-MODed the clock I made last time, including the dial and hands.。 I have two problems、Chapter ring of SBDC051 (SPB051) seems not to be sold outside the company、never seen。Search does not come up。Different sizes for boys and others。The SBDX019 dial has a minute scale on the outer circumference, so I personally want to combine it with the silver chapter ring.。Then measure the size、The outer circumference of the boy's chapter ring, which was made by cutting the inner circumference last time, is about 30 mm.。different height。When I put it in the SBDC051 case, it moved in the gap, so I was wondering what to do.、Spread the sapphire glass packing height 2.5mm for another watch that you had at hand slowly and carefully with needle nose pliers, align the outer circumferences, and attach it to the outer circumference of the chapter ring.。because there is still a gap、Do the same thing again and install gaskets around the outer circumference.。This time it's too thick to fit in, so slowly and carefully scrape the outer edge little by little with sandpaper.、Scrape top and bottom、It is still a little high at 2.2mm in height, but it fits perfectly around the circumference, so I installed it.。The height is press-fitted with the expectation that some space will escape due to the curvature of the glass.。0.2The glass may be loose about mm。I was so busy working that I forgot to take a picture.。 The next problem is that the diameter of the dial is different。SBDC051 is a general 28.5mm dial、The dial of SBDX019 is big...。I had no choice but to do it so far, so I shaved the outer circumference with a router.。Rely on your senses, appearance, and the scale on the outer circumference、so that the center does not shift evenly、Clear the outer circumference problem by scraping so as not to break the circle。However, although the dial was cured,、I entered through a gap and was covered in iron powder。。I want to avoid scratches and dirt.、It will not fly with dust blowing、Even rodico can't get it...。Take the plunge and wash with water to feel good、Remove fine particles with a rodico、After cleaning the dirt on the index with a glass pen、Complete revival! No noticeable scratches or dirt、I managed to get through。 It took a lot of time and effort to scrape the chapter ring and the dial、I was able to do something with 120 points on my own.。The luminescence and color of the bezel match、I like the reflection of the night light。This component SBDC051 + SBDX019 dial, hands, buckle + SEIKO logo crown (probably ebay)+ Non-genuine chapter ring gasket = SBDCX0519?

5 Sports

SKZ209 – GMT-Master 2 (Batman) Specifications

Because the first machine of GMT Master2 was done too well、I made a second machine。 This time it's Batman。But this time I wanted the crown to be at 3 o'clock.、 The case is procured from outside the company♪ The custom parts are as follows - movement：NH36-Case、Bethel、Bethel insert、Chapter ring、Windshield：Watch&Style -　3 stitches、Faucet、Dial、Clasp：Aliek - GMT hand：e-bay - back cover：SKZ209J1（Mr. Purchased from the shop manager of the clock shop ♪) - Oyster bracelet： Miltat Watch Bracelet The movement is NH36 like the first machine, so GMT is Nanchatte。It is attached to the hour hand shaft together with the hour hand and cannot be moved independently.。It is set at 9 hours, the time difference between Greenwich Mean Time and Japan.。 3The needle and GMT are colored with a Copic pen to match the index.。It will fade over time。 I wanted to use Boy's back cover、The selling price on E-bay is $100 plus shipping, which is quite expensive, so I gave up! After consulting with the store manager、Boy's back cover was sold out、I bought this because the size of the atlas fits.。5The engraving on the shield is cool ♪ It is the only genuine Seiko part (sweat) the other day、According to the information received from SHUKU, NH34 (GMT specification) seems to have started to be sold at Arieq.。Well, it's expensive, so if the price drops, upgrade with this movement.、I want to make it a real GMT specification ☆

Dial Hand Bezel etc. custom

Goods outside – black bay homage clock

This is not a suspicious homage dial、I added some touches to the blank dial to make it look like it。The third homage clock。 Custom parts are as follows - movement：NH35 - case set、Bezel insert、belt、Dial：Aliek - Seiko and 5 Shield Applied Index：Since the applied index of Seiko and 5 shields was silver、tinted rose gold。When I drilled a hole in the dial and put it on, the poor quality of the paint became apparent.、I would like to redo this later。 Painting small parts is difficult.。I still don't have enough training (sweat)

Aftermarket case

Goods outside – deepsea homage clock

Although it is a suspicious homage dial that is on sale at Aliek and e-bay、 Well, the quality is high! This is the second homage clock。 Custom parts are as follows - movement：NH35 - Clock body set：Ariek-Dial：It's not like Aliek customization、This is a watch that was sold as a Deepsea homage watch, and it is completed by replacing the suspicious dial with a pon.。 Ryuzu hasn't upgraded yet、It is a part that I want to replace one after another.。I also want to fix the logo of the ring lock system。 Especially the Limited Edition (laughs) I already replaced the clasp、one more step、It is real Seikolex in two steps☆

Dial Hand Bezel etc. custom

100Mod (custom) example of m Divers (SKX023K)!

I also wanted a seiko mod, so I bought the skx023 big crown specification on Yahoo auction and got the parts.、I don't have the confidence to do it myself.…When、It is requested amount。 A cool model was created with a creative order dial + top hat windshield! ^^ The following is a reprint of the requester's email。 ー ー ー ー ー ー About purchasing parts、 The dial was created by a request from an overseas Instagrammer named stph_dxtr.。 3needle is mercari、I bought the top hat for skx023 on Yahoo!。 Both manufacturers are unknown.。 Sorry for the inconvenience、Thank you for submitting your proxy!

Aftermarket case

Goods outside – Equine homage clock

While researching Aliek and e-bay, I found a lot of suspicious homage dials。 That fad? I made several homage clocks by riding on、 Introducing。This time the first。 Custom parts are as follows - movement：NH36 - case set：Ariek-3 needles：Ariek-Dial：Aryek Day indicator is invisible, so English/Chinese specification remains、I haven't upgraded the crown and clasp either.。I would like to use this for sale。 The dial is beautiful、It feels like the light blue。36Compact size with mm case。It's finished in a nice way, so I'm thinking of making another one for myself with a black dial♪

5 Sports

SNZH53 – Empty shell diver resurrection

I moved the SNK357 dial to a sparkling watch、It's a blue diver's watch that has become an empty shell、Purchase the dial from the store manager、revived。 Custom parts are the same as before - movement：4R36 (parts removed from other junk) -Case set：Ariek-3 needles：Ariek-Dial：SNZH53J1（Mr. Purchased from the shop manager of the watch shop ♪) - Silicone bracelet：Aliek: As usual, the day indicator is in Japanese.、Crown and clasp not yet upgraded。Replacing the tube for the crown is a bit of a hassle, so I put it off.。 Personally, I like the blue dial ☆ I think the feeling of a diver's watch has improved a lot.。

Dial Hand Bezel etc. custom

SNK355 – neo classical

An old and new mod made using the SNK357 dial、Because the neo-classical was made into an unexpectedly good sparkling clock,、one more、 size、Made in different colors。 Purchasing a fluted bezel case set from Aliek、Changed and relocated the position of the zodiac foot on the dial。 Custom parts are as follows。 -Movement：NH36-Case、Bless、Clasp、Crown：Ariek-Dial、3needle：SNK355K1 (Parts removed from junk) I think this Seikolex is also finished in a good way.。I personally prefer the 39mm case.。36mm case may be suitable for women。so i am thinking of selling。Therefore、crown and crown、The day indicator remains genuine。  

Dial Hand Bezel etc. custom

SNK357 – Upgrade (Neo-Classical)

before、SNK357, which was made into a diver's watch with an external case, has been upgraded to a sparkling watch this time.。 Purchasing a fluted bezel case set from Aliek、 relocated with pop。The glittering clock is completed just as I imagined ☆ The custom parts are as follows - Movement：NH36-　 Yao car：Mr. From the manager of the shop clock shop (thank you as always♪) - case、Bless、Clasp、Crown：Ariek-Dial、3needle：SNK357K1 (parts removed from junk) As usual, the day indicator is in Japanese.。Crown and clasp with crown。 I think it's a pretty good Seikolex。This is a 39mm case.、 36I made another one with a silver dial (SNK355) in a mm case ♪