Aftermarket case

final black boy

Sorry it's been a while since my last post。I will post it after a long time。 while it's hard to get started、This is a mod (custom) production example using an external product case on 6/22! was overtaken by、DLW's MM300 case is made to fit the shape of the genuine 22mm flash fit.、As far as I can see the image, the shape seems to suit my taste! There was something that fascinated me。In the MM300 case of namoki that I used before, only 20mm breath of namoki can be used、Because there was a problem that the genuine buckle could not be diverted。(Recently, I found an 18mm buckle that seems to be usable.。) Since I got Black Boy 3 years ago, I've modified it and rearranged the parts、While trying to create a black boy that suits my taste and satisfies me, through trial and error、This is a wonderful form that is loved all over the world.、thinner、I also feel that I would prefer a case that doesn't have a bulky feel to it.、I feel like I finally got there this time。 Parts DLW → Case Namoki → Chapter ring、Crown、steel bezel insert、Slim coin edge bezel in first photo、slim back cover、Slim flat sapphire crystal Watch & Style → Slim coin edge bezel in the later photo Strapcode → Breath genuine parts → 7s26 move、Gray spacer、Dial、needle、20mm wide buckle Thickness is 12.6mm even when tightened with a rubber ball。If I do my best, I might be able to get to 0.1。。By comparison, it was 13.4 mm in the genuine state.。 namoki's glass seems to have a larger circumference、I used the genuine aluminum bezel insert at first、If you think that the bezel does not rotate, the inner circumference of the bezel insert and the outer circumference of the glass interfere with each other and it does not rotate.、Even when I removed the bezel, it didn't come off at all, so I forced it with a kojiake, so maybe it deformed、There is also a feeling that the bezel has become loose because it can be easily attached or detached with just your hands.、The bezel insert is also ruined。later、I also tried the namoki slim sub-bezel, but even if it's not deformed, it's a little loose and easy to put on and take off, so it's unstable Watch&I exchanged for Style。I was relieved that this was firmly attached and did not come off。Namoki's design was good because there were few bezel lips, but it can't be helped。 Finally、Thickness、The shape may be self-satisfaction, but I am very satisfied! After all, it seems that he likes the genuine dial and hands that have a boyish feel.、Repeatedly putting on and taking off the needle、If you look closely, there is a slight deformation, but there is also attachment、The bezel also has a matte design insert that matches the matte dial.、While incorporating a new feeling with the chapter ring of the image like SBSC、For me, I became the best black boy。With this, making your own best black boy is complete!

Etc.

SBTR085 seiko spirit & SPEEDTIMER SPEEDMASTER

I've been watching SBDL085 since last December, thinking it's cool.、SBDL095 I think it's even cooler, but what's the difference?、This is cool, but I wondered if I could make a wide and thin 085。On the way to getting interested in quartz, I got a used Speedmaster in a similar color in January.、The buttons were stuck, but I was able to disassemble the push buttons while patiently cleaning and polishing the entire case.、The contents are in good condition and are not tampered with。replace damaged glass、Revival。The movements of the 1/100 second chrono are interesting.。 SBTR has many variations, and the case and bracelet are slightly different, but there are various combinations。While thinking about combining this case with this color chapter ring and this bracelet, I purchased two spare SBDL085-style dials at Aliek.、It's too big for the case, so I have to scrape it off, but it's troublesome and I cut the outer circumference with scissors, but it's a mess and a failure. I bought it because the board was out! When I received it, the texture was somewhat different from the first one, but it felt good and I installed it on the day it arrived.、SBTR of SBDL085 style is completed。 This time parts SBTR ... Yahoo auction、Merukari、PAYPAY flea market speed timer sapphire glass、SBDL085-style dial and hands・・・Ariek Speed ​​Timer Gasket・・・Nakamura Watch Materials Store

Aftermarket case

SEIKO NAVITIMER02

Been busy lately and haven't been able to post for a while、I'm sorry。I will post it after a long time。I was looking for a MOD subject using Quartz Chrono Move、I found a Navitimer-style case and dial from Company B in Ariel, so I assembled it.。 Since there seems to be a clock with the same name, it is confusing with the original clock, so I will call it 02.。 For me, as a result, the case and dial are very cost-effective、I was very satisfied with the completion of such a profound feeling! The blue AR reflection is also reminiscent of B company's watch.。However、The no-logo bracelet that came with the case didn't have many pieces that could be adjusted and was too big for my arm, so I changed it to one with a logo with a similar design that I found on Aliek and more adjustment parts.。The feeling is similar to the OMEGA x SWATCH collaboration Speedmaster, and I enjoy it ♪ This time's parts case、needle、Set of bracelets and dial、winding core、Another bracelet Aliek VK63 movement Removed from a used SEIKO Sbtr at Mercari

Dial Hand Bezel etc. custom

ATLAS GMT “Gulf Boy”

This time, I made a GMT Atlas Boy with a pop color using the NH34 movement.。phantom needle、I wanted to create a genuine feeling like SBSC while adding interesting elements such as Lefty style.。I took apart the junk atlas and refinished it with a file and a leutor, and polished the side of the case.、Reinsert the diagonal hairline into the rug、I tried center polish on the breath。(When、Even so, the finish is quite rough.。I got tired of polishing on the way。) The inner circumference of the bezel was also cut a little so that the insert for the boy can be inserted.。 The chapter ring is also shaved from the one for boys to reduce the thickness from 2.2mm to 1.8mm.。I put a piece of plastic bottle cap as a spacer around the circumference.。 I don't know why I get so excited just by changing the number of needles from 3 to 4, but this time there was no interference.。dial first、I didn't fit in the move, so when I checked it carefully, the needle hole in the center was thick with GMT.、When I widened the hole with a round diamond file, it fit without any problem.。I made the last one with momentum, so I shortened the winding core too much and there is a problem with operability, so I'm waiting for the arrival of a new stem for NH34 to fix it...。 Parts for this time Atlas…Mercari Move、chapter ring…watch&style text disk、GMT hand…Aryek minute hand、Hour hand…Genuine SKX031 Second hand…Genuine SBDC051 Bezel insert、Case back pig…DLW mineral glass、Glass packing…Nakamura watch material shop Crown…ebay

5 Sports

New Monster <SRP599J1> Hand and crown replacement MOD

This time, I modded a new monster that I got secondhand。 It was said that it was used infrequently, but it actually feels like it has been used quite a bit.、I took it apart, pulled out all the pins other than the breath and adjustment parts, and repeated ultrasonic cleaning from partial dent cleaning to restore the shine to a good feeling! I couldn't remove the bezel, but I was relieved that the ultrasonic cleaning made it sticky and hard, but now it rotates normally.。I think I was able to make the scratches less noticeable by refinishing the hairline in my own style.。 I really liked the genuine design, so I planned to replace only the white needle with a silver needle and finish it.、After assembly, the second hand and minute hand inevitably interfere with each other.、While trying again and again、I dropped the move, dial, hands, and crown assembly on the floor.。Since it broke with the winding core stuck in the genuine crown、The diameter of the crown with the external logo that was not used in the parts box is close、seems to be useful。I also replaced the crown in a hurry。hands and dial、the move looks okay(´▽｀) Although I was prepared for the problem of calendar and disc wheel overlay。slightly warping the second hand、I was able to fix the interference by removing only the second hand and lightening the pushing condition and trying various things。The waterproofness of the crown has probably gone down, but since it has a logo, it's okay。Luminous is also OK with a color that does not feel out of place with genuine! This time the parts、needle watch&style、It was crown ebay。

Dial Hand Bezel etc. custom

1st Diver：Catch up with senior brothers of MOD content! When

Using the method I made last time、I modded SBDC053 because I wanted to try the 28.5mm First Diver reprint model dial that I found in Aliek as soon as possible.。 If you measure the thickness of the case + glass in the genuine state、1Because it was 0.4mm thinner than st 1、After all, it seems that the shaving of the chapter ring was sweet last time。 Because the glass gasket was 1.4 mm、1.0Only mm fits。I may fix it if I have the chance...。So, this time, I cut the chapter ring more firmly than last time, and made the thickness of the chapter ring 2.0mm.。(Actually, it is just 0.2mm thicker than the regular thickness, but due to the balance of the roulette engraving,、This was the limit...) While I was making it, I wanted to finish it quickly, so the crown was in the parts box for the time being.。The gasket for the chapter ring is also available in a similar size from Aliek this time.、I wrapped it twice again, but it was just a little loose.、For the chapter ring, I used a little double-sided tape to fix the center of the engraving.。Jubilee Breath is Aliek、Because the burr in the part that contacts the case was terrible、While polishing with a file and polishing with stainless steel polishing to create a finish that is gentle on the case、Replaced with SBDC051 buckle for a more genuine feeling。The luminescence is also nice, and the dial also has a nice color depending on the amount of light.。I like the sunray reflection、I thought it was a dial of great quality.。Ariek is terrible...。yoohiyy's、7Recommended for S26-0040! there was brown。 If you look side by side, the index placement has been slightly adjusted to match the 28.5mm diameter.、I don't know if it was originally this balance or not because I haven't seen the actual SBEX009、there was a slight difference。The part this time is a needle、Dial、The breath is Aliek and the crown is unknown, but it is a common design。Chapter ring was previously on ebay for boys。

Belt custom

RE:1st Diver 〈SBDCX0519〉

The shape of the case of SBDC051 is cool! I've been feeling lately、I was able to get a used SBDC051 in good condition, so I re-MODed the clock I made last time, including the dial and hands.。 I have two problems、Chapter ring of SBDC051 (SPB051) seems not to be sold outside the company、never seen。Search does not come up。Different sizes for boys and others。The SBDX019 dial has a minute scale on the outer circumference, so I personally want to combine it with the silver chapter ring.。Then measure the size、The outer circumference of the boy's chapter ring, which was made by cutting the inner circumference last time, is about 30 mm.。different height。When I put it in the SBDC051 case, it moved in the gap, so I was wondering what to do.、Spread the sapphire glass packing height 2.5mm for another watch that you had at hand slowly and carefully with needle nose pliers, align the outer circumferences, and attach it to the outer circumference of the chapter ring.。because there is still a gap、Do the same thing again and install gaskets around the outer circumference.。This time it's too thick to fit in, so slowly and carefully scrape the outer edge little by little with sandpaper.、Scrape top and bottom、It is still a little high at 2.2mm in height, but it fits perfectly around the circumference, so I installed it.。The height is press-fitted with the expectation that some space will escape due to the curvature of the glass.。0.2The glass may be loose about mm。I was so busy working that I forgot to take a picture.。 The next problem is that the diameter of the dial is different。SBDC051 is a general 28.5mm dial、The dial of SBDX019 is big...。I had no choice but to do it so far, so I shaved the outer circumference with a router.。Rely on your senses, appearance, and the scale on the outer circumference、so that the center does not shift evenly、Clear the outer circumference problem by scraping so as not to break the circle。However, although the dial was cured,、I entered through a gap and was covered in iron powder。。I want to avoid scratches and dirt.、It will not fly with dust blowing、Even rodico can't get it...。Take the plunge and wash with water to feel good、Remove fine particles with a rodico、After cleaning the dirt on the index with a glass pen、Complete revival! No noticeable scratches or dirt、I managed to get through。 It took a lot of time and effort to scrape the chapter ring and the dial、I was able to do something with 120 points on my own.。The luminescence and color of the bezel match、I like the reflection of the night light。This component SBDC051 + SBDX019 dial, hands, buckle + SEIKO logo crown (probably ebay)+ Non-genuine chapter ring gasket = SBDCX0519?

Aftermarket case

７００２Ｄｉｖｅｒ　ＦＸＤ

The 7002 diver that I got at Yahoo auction when I first started MOD。 If you remove the core, it won't fit、I immediately broke the move、The dial is after folding the zodiac foot and putting it in SKX031、I was sleeping all the time by changing to a different dial、I liked the feeling of the design, so I was wondering if I could use it again someday、This is it in Aliek! I found a titanium case called、I bought it immediately。(It looks like the case of a watch called Tactical Frog, an homage watch.。) Arrived today, so I assembled it immediately。Like the dial, the needle was originally attached at the time of purchase at Yahoo!、It was a little loose, but I liked the color, so I kept it.、I got a tool for caulking holes at Ariek again, but it was useful and I was able to revive it.。 It's a little thick, but the balance is pretty good, and I think it's a cool watch that's comparable to the Pelagos FXD.。Even so, I was impressed that this titanium case was well made。in the middle、After assembling, even if iron powder blows, it gets mixed many times、I thought it was strange, so when I looked closely, there was a lot of iron powder left inside the case.、When I was removing it with Rodico, I found dust in the gap between the chapter ring and the glass...。When I pushed the rodico to remove it, there was an incident where the piece of rodico got caught between the glass and the chapter ring and could not be removed.、When I had no choice but to remove the glass, I was relieved to be able to remove it normally.。 I appreciate that the color of the room is different and the light of the needle is slightly weakened.。

Dial Hand Bezel etc. custom

Although I was prepared for the problem of calendar and disc wheel overlay(Although I was prepared for the problem of calendar and disc wheel overlay) MOD

62MAS MOD that I made before。62MAS MOD that I made before。 62MAS MOD that I made before、30.562MAS MOD that I made before。 62MAS MOD that I made before。62MAS MOD that I made before、62MAS MOD that I made before、62MAS MOD that I made before。62MAS MOD that I made before、62MAS MOD that I made before。 62MAS MOD that I made before。62MAS MOD that I made before、I'm sorry。62MAS MOD that I made before、Although I was prepared for problems with calendars and disc wheel overlays、Although I was prepared for the problem of calendar and disc wheel overlay(´▽｀) Although I was prepared for the problem of calendar and disc wheel overlay。Although I was prepared for the problem of calendar and disc wheel overlay、Although I was prepared for the problem of calendar and disc wheel overlay、Although I was prepared for the problem of calendar and disc wheel overlay。 Although I was prepared for the problem of calendar and disc wheel overlay、Although I was prepared for the problem of calendar and disc wheel overlay、Although I was prepared for the problem of calendar and disc wheel overlay、Although I was prepared for the problem of calendar and disc wheel overlay。Although I was prepared for the problem of calendar and disc wheel overlay。Although I was prepared for the problem of calendar and disc wheel overlay。

Dial Hand Bezel etc. custom

“waiter” Save the Ocean dial MOD “Ocean Knight”

I've always been interested in this samurai dial, so I made this for this new work.。I think about the name because it's a big deal、Considering the original style of each part、 Bezel Insert Planet Ocean Dial SAMURAI Save the Ocean Needle MM1000 Case MM300 Samurai? Ocean? Master? In association with various things, the case is not as rugged as a samurai.、Shall we give it a more Western-style name? When。I will convert the samurai into a knight without permission and leave it as Ocean Knight because it is a knight of the sea。 Bezel Insert Planet Ocean Dial SAMURAI Save the Ocean Needle MM1000 Case MM300 Samurai? Ocean? Master? In association with various things, the case is not as rugged as a samurai.。I was planning to go with the MM300 bezel, but this one fits better.。 I tried using a thin case back (also namoki) this time。The thickness is within the golden rule of 12.2mm to 12.8mm.。 3 o'clock position crown、There is no crown guard, but it is expected that the thin BIG CROWN will hit gently.。 The bezel insert of this part is Watch&Style、Sapphire crystal is seiko mods、Chapter ring is genuine navy boy。Other than that, it was procured from namoki.。The night light is also quite good。