62I made a mas MOD。 Material is Heimdaller or Steeldive、namoki case、tokeilab etc.、The result of thinking about what to do、I made it san martin。I'd like to make it using a genuine buckle this time, and the namoki case seems to be compatible with the parts for SKX007 and easy to handle, but because the breath is tapered and the buckle is 16 mm、I couldn't find a genuine buckle, so I searched for a breath buckle of 18mm or 20mm.、In addition, I thought that the appearance without chapter ring was similar to sla017, so I procured a non-current version of san martin from ebay as a used item.。 Dial、The needle set was procured on ebay、I'm worried about whether the dial size fits.、When you open the back cover, you get a bad feeling.、Because the dial was about 31 mm、Does not fit。For the time being, if you put in your own chapter ring for boys, it seems that it will fit in the position of Shioume that can hit the glass.、Is masking tape a cushioning material only around the outer circumference? I rolled it in instead。It's a pity that the chapter ring hides and fixes the missing part of the outer circumference of the dial and the minute scale is half hidden, but please stretch it by the curve of the glass depending on the angle.、The chapter ring and the ground plane of the glass also blurred nicely.。 The crown also prepared the one with the SEIKO logo, but it can not be used、It seems difficult to replace the crown tube, and is it similar in shape to the original dolphin? I wonder if sharks are also adorable。SBDX019 Cannot be attached to the genuine buckle、Since the part that links to the buckle of the breath was 18.2 mm, I was able to adjust the width with a file and a stainless steel polish and install it.。The fit is quite close to genuine quality。