From to buy the SNZG15、Large dial is trial and error that it would be can be mounted、I was able to realize at last this is。
Appearance before this is to remodel。You already tampered。
Since the recessed portion of the dial is dial the size of the regular 5、Now corresponds big dial。
Dial and needle are for the movement of MIYOTA。
7It did not have enough size in the dial and needles for the S、I put forced。
Calendar of the window but I want the same position in the MIYOTA and SEIKO、It may be due to the movement form of。
Belt also will be changed to the leather of dark blue to match the dial!
The size of the dial is 33.5mm、It is for the type of MIYOTA Movement of 8215 along with the needle。
Windshield sapphire crystal(Chinese-made 35Φ)。
Since the dial is fitted from the windshield side、If you do not remove the needle movement is not out of the case W
e? Similar somewhere in the watch?
It is the fault of the gas -
SHUKU-san, it ’s been a long time.。
It was because of my mind that it looked like a Swiss brand that made me want to dive.
"Since the dial was fitted from the windshield side、The movement will not come out of the case unless the needle is removed. "
← So how do you remove the windshield? !! Psychokinesis?
Yoshi Pee
thank you for your comment。
It looks like a Swiss brand somewhere ... It's like someone else's sky w
When removing the needle、Psychokinesis ... no、Remove the windshield together with the bezel。Since it is a case structure that is not normally done to remove this、I'm in trouble。(I knew it, but w)
Originally it is fixed with a gasket,、It is a current seal。
I'm looking for a suitable packing。
Hello SHUKU!
I also saw the HP。
Shaving the inside of the case、By processing the needle、It transcends craftsmanship! The quest is too great。I have to learn ...
Mr. Kayoro
Shaving the case is risky,、Even with SNKE01、The sensation may be paralyzed。
If you grind it with a drill、It was so hot that the surface of the leather gloves was scorched.。If you leave the packing attached, it will melt.。
Nowadays, why don't we try to make the boy's case a little fat and slim? And、I'm leaning towards the shaving system w
I will aim for a dangerous custom w
SHUKU's
Hello、･ ･ ･ With the same feeling as commentators in various fields、It ’s extremely admiring.。
I'm embarrassed to do the work of only the small hands that I'm doing ...
If you move your eyes to the blog and watch it、How are you going to series 15! !!
(The volume of Star Wars episode series is hazy)
Like an old seiko、If it is a specification that is supposed to be opened from the glass side, there is no complaint.。
Step adjustment、Even if you can do it from the back、If you try to change the pattern of the board or needle、(what if、(If the glass is semi-permanently fastened with a gasket or packing) If you pull it away from the back of the move to the case、The board is stuck、The needles are just torn off from the truth! ?? The thing is、If you fix the glass firmly、Is it a one-way prepared thing? It was
Talking about being compromised by talking about sticker support ... It's annoying.。
Yohi-sama
I don't have much resistance to open it from the windshield side、I'm worried about water stoppage if it's a seal.。
If you seal it well and remove the part that sticks out to the outside、I think it's filled as it is ...
When removing the sealed bezel、Can you pry it open by hitting it with a force?、There are various ways to cut it with a cutter and open it.、Because it does not come off in everyday use、If I can't find a good packing, can I use a sticker? I think。
It's too amazing! !! !!
How about the store manager's store options www
I forgot to comment!(Sweat)
so、I hate it! (Lol)