Windshield、Bezel insert、Chapter ring is DLW
Bezel is seikomods。
The rotation of the bezel is stiff for some reason。
(There is no interference between the insert bezel and the windshield。There is also a click feeling)
dlwwatches
・Sapphire Double Dome – No Bevel Edge – Clear AR
・Steel Insert – 007 Yacht Master Black X Steel
・C.R. – SKX007 – Matt Black (0-60)
seikomods
CT244 – SKX007 SRPD Case Type Bezel – Ratchet
KEN、Thank you for the other day!
so、The reason why the rotation of the bezel is heavy is that the O-ring is squeezed out.、There are various causes such as lack of silicon grease,、The most in my experience、The O-ring is too thick and the size does not match.。
Depending on the bezel, a dedicated O-ring may be required,、Because the thing that came with it is quite sloppy、If you replace the attached one with a normal one、It turns around smoothly。
If it still doesn't work, there is no choice but to assemble without an O-ring.、Then it will be a cheap rotation sound at once.、Which one to take…
If the O-ring is twisted, should it be corrected?、If you want to make the O-ring thinner, you can use an acetone-based nail polish remover.
after that、Silicon-based、Silicon-based。
thank you for your comment。
Silicon-based。
Silicon-based、Silicon-based。
If the bezel comes off safely, I would like to check the size and diameter of the O-ring.。