Aftermarket case

Tudor homage(Mod again)

It ’s a Tudor homage I made before.、After all, I wanted to bring the case shape closer, so I reassembled it using the case recently sold by DAGAZ.。 There was an explanation on the site that this case is compatible with SKX007 series crystals.、In the case of the double dome, there was a problem that the position of the bezel was low and the frosted glass part on the side of the crystal was exposed with many crystals and the appearance was considerably deteriorated.。(There is no problem with the genuine flat crystal。) there、I bought a top hat from a shop called BORNEO MODS。This product is、The sides were treated in the same way as the surface, so it fits neatly.。 The dial of Lucius Atelier had a spear in the center and it looked tropical.、I also decolorized the insert and tried to match the atmosphere。 I hope it will be helpful for those who are planning to purchase the DAGAZ case.。

Aftermarket case

Samurai(Mod again)

Manager like、Thank you for posting on your behalf the other day! I made a military two-tone watch using the SKX00x compatible Samurai case I had purchased before.。 Case and bezel for a feeling of abuse、I tried to process the windshield。 Below is the parts list。 Case:Watch and Style Samurai case PVD Black Dial:Lucius Atelier Hands:Namoki Mods Skeleton hands movement:NH35A bezel:Seiko genuine bezel insert:Yobokies Crystal:The big bubble blue AR case of unknown manufacturer was PVD matte black.、Is the Samurai case a good idea? Since the edge is standing, I thought that the one with the bare metal would give a three-dimensional effect.。but、I thought that if I rub it directly with a file, it would feel overkill, so I polished it with Tamiya's compound.。 It's hard to understand if it's a photo、There is a gradation from the bullion to the black background from the edge to the surface.。 I liked the shape of the windshield of unknown manufacturer, but the blue AR was too strong and it was in a deep blue state.。I don't want to use it as it is、In order to reproduce the abused state, I took the plunge and forcibly dropped the AR and made it full of scratches lol(It's usually not possible to get covered with internal scratches)。It was cloudy with a nice feeling。   The bezel is the genuine shape of the new Seiko 5。It's also matte black, but it looks good and I like it.。 It was reborn from matte black to a gunmetal semi-glossy case, and I personally could do the processing I wanted to try again.。 Luminous and dial is blue、Hands and inserts are green and beautiful。

Etc.

Remod、Etc。

I will post it after a long time。 I don't know what the correct answer is in the MOD world、I am remoding existing things and replacing parts.。 I will post it because it has settled down in the current situation。 The first is、A mod that uses the Lucius Atelier dial and hands.。 Aiming for beautiful eyes, using FFF Hands and DAGAZ Super dome kit、I tried to eliminate the gap between the insert and the crystal。 The second is、Namoki Mods Skeleton Hands、I made a military watch using CT124。 The third is using an external case of 62mas reissue、I made it。The tropic strap looks cool, but it's hard and not comfortable to wear lol The fourth one is、I reassembled it into an ordinary watch using a newly purchased case that was previously made for Lefty.。This is a little different、I'm using a top hat red AR、Unlike the DLW product, it was thinner, so I combined it with a Namoki slope steel insert so that the last-minute crystal would pop out from the insert.。 Compared to FLAT TYPE E、I like it because the edges are rounded and fit nicely。 I'm pretty stray、I would be grateful if you could give me some advice。

Etc.

Repost

I assembled one by one while changing the parts of the clock I posted earlier while changing the parts。 California Dial used to be TOPHAP Sapphire Crystal、I was building with a pilot bezel, but since I got a sapphire crystal of Big bubble, I replaced it and re-modified it in addition to the SUB bezel.。 Became a full-fledged submariner in Bamford。(Other than hands) I used to reassemble with blue SMP insert, but I wanted to make it astringent and reassembled with Dagaz SD kit crystal and insert.。Case is Watch&I used a type of Style 3 O’Clock without crown guard。 SD kit of Dagaz、Recommended because there is no step at the connection between the crystal and the insert.。The belt has Miltat's super engineer II。 This time we have created a new pilot-like individual。 I'm a left-handed person, so I keep a clock on my right、I tried to mod by tilting the dial so that it is easy to see when riding a motorcycle or car。 I've never seen such a specification, so I hope it will be helpful.。 2I'm still a beginner at the first post, so I'm happy if you can give me advice etc.。  

Etc.

This is the first post。

Nice to meet you all。 I know this site so I will post it。 I'm new to the world of mods、I made two immediately。 The first mod is here。 Crystal、DLW Flat type E。 I made it by the moment I fell in love with the SOXA dial。It seems like theory mods like DOXA、Completed as you like。 Case,crown,Bezel,Hands:Namoki mods dial:Dagaz Crystal,insert:DLW Movement:NH35 Click here for the second。 DAGAZ's California Dial。 Crystal、DLW Top Hat。DLW said it was only for flat inserts.、I liked the slope insert, so I checked variously and put on a slope insert made by Dagaz.。I am satisfied because it fits in without any gaps。 Case back、Since I chose the back sapphire of the sapphire, I saw the movement with NE15。 Case,crown,Bezel:Namoki Mods dial,insert:Dagaz Crystal:DLW Hands:eBay movement:NE15 Sorry for my poor post!